ORIGINAL PARTS

ORIGINAL PARTS

Original CIFA parts are designed by the same professionals who design the company’s equipment. What is more, they are guaranteed by specific and accurate tests to ensure high quality and performance standards.
To avoid leaving the safety and efficiency of a machine or plant to chance, only genuine parts must be used. A original part means safety for today and tomorrow; it means extending the lifetime of the machine and increasing the value of the used equipment should you decide to sell it. All this can be achieved with greater convenience and safety by taking advantage of our scheduled maintenance packages.
Original CIFA parts can be found at all CIFA repair shops.

Aftersales

PUMPING UNIT PARTS

PLATES

Our plates and rings have very hard inserts in the areas most subject to wear and tear.

PUMPING PISTONS

Our pumping pistons feature customised solutions in the mixtures of parts in contact with the pumping liners in order to increase the lifetime of the unit's components.

SEAL KIT

The seals used in our pneumatic and hydraulic components are tested on the test bench.

S-VALVE

Our S-valves are made from special alloys that are extremely resistant to product wear and tear from a wide variety of concrete types.

DRUM PARTS

CIFA’s expertise is the result of in-depth knowledge of the equipment and its use. For this reason, the materials used to make our concrete mixer drums differ according to the various types of machinery and their specific uses.
Indeed, you can order drums made from different materials for the various mixer series.

RY/SRY SERIES DRUMS

Made from S355 JR (formerly Fe510B) material, with the following characteristics:

  • Rounded bottom: 7 mm thick;
  • Bottom cone, cylindrical band and intermediate bands: 5 mm thick;
  • Outlet cone and outlet: 4 mm thick.

SL SERIES DRUM

Made from S355 JR (formerly Fe510B) material, with the following characteristics:

  • Rounded bottom: 7 mm thick;
  • Bottom cone, cylindrical band and intermediate cones: 5 mm thick;
  • Outlet cone and outlet: 4 mm thick.

SLX (EXTRA LIGHT AND HARD) SERIES DRUMS

Made from S900 material, with the following characteristics:

  • Rounded bottom: 7 mm thick;
  • Bottom cone, cylindrical band, intermediate cone and discharge cone: 3 mm thick;
  • Outlet cone and outlet: 3 mm thick.

HD (HEAVY DUTY) SERIES DRUMS

Made from S355 JR (formerly Fe510B) material, with the following characteristics:

  • Rounded bottom: 7 mm thick;
  • Bottom cone, cylindrical band and intermediate cones: 5 mm thick;
  • Outlet cone and outlet: 4 mm thick.

ENERGYA DRUMS

Made from S900 material, with the following characteristics:

  • Rounded bottom: 7 mm thick;
  • Bottom cone, cylindrical band, intermediate cone and discharge cone: 3 mm thick;
  • Outlet cone and outlet: 3 mm thick.

PIPE PARTS

Pipes are one of the components upon which optimal operation of your machine depends. To guarantee you the complete safety of this component which is so vital to your work, CIFA has opted to design and manufacture the pipes for its equipment within a special plant, directly supervising the production process down to the smallest details. You can request genuine CIFA pipes - normal, tempered and long-life - from your CIFA Orange Check repair shop with special deals and an excellent quality/price ratio. CIFA’s expertise is the result of in-depth knowledge of the equipment and its use. For this reason, the materials used to make our concrete mixer drums vary according to the different types of machinery and their specific uses.

SPRITZ SYSTEM PARTS

Shotcrete machines are subject to heavy-duty use in tricky spaces such as tunnels and mines. For this reason, CIFA pays special attention to critical components subject to wear and tear. One of the primary components is the spray nozzle, designed by CIFA to guarantee the most homogeneous mixing possible and to minimise the rebound effect. The polyurethane mixture used in its manufacture is fruit of CIFA’s experience, a production process that focuses on quality, and a series of tests that guarantee long-lasting performance.

BATCHING PLANT PARTS

A batching plant is an especially complex system in which mechanical components subject to heavy wear and tear interact with sophisticated electronic equipment which automates its operation, using formulae based on the raw material used to obtain the concrete required for the specific intended use. Once again, what makes the difference is CIFA's extensive experience gained through the hundreds of plants it has designed, built and installed all over the world, together with the research and development office's direct contact with the numerous technicians and operators who use CIFA technology in their everyday work. For this reason, CIFA offers a complete inventory of genuine parts for all components subject to wear and tear.

CEMENT STORAGE SILOS

Varying capacities and diameters. Made in monolithic or bolted form, complete with: discharge outlet, fill pipes, vertical access ladder to upper area and parapets.

AGGREGATE FEED SYSTEM AND FEEDER BELTS

Complete with belts, polyurethane scraper, safety lines and CE protective nets.

MIXER BOOMS

  • Made from spheroidal cast iron
  • Hardness 600 HB
  • Heat treatment
  • Service life: 40,000/50,000 cycles at mixer capacity

HELICAL BLADES AND MIXING BLADES

  • Made from high-chrome cast iron
  • Hardness 700 HB
  • Heat treatment
  • 18-20 mm thick
  • Service life: 45,000 cycles at capacity

BOTTOM AND SIDE COVERS

  • Made from high-chrome cast iron
  • Hardness 700 HB
  • Heat treatment
  • Thickness 15 mm
  • Service life: 45,000 cycles at mixer capacity

MIXER SHAFTS

Made from quenched and tempered steel.

CABLES

  • For CIFAMIX mixer - Diameter 12 mm and breaking load 15500 daN.
  • For CIFAMOOVE 90 E 75 mixer - Diameter 14 mm and breaking load 16600 daN.
  • For CIFAMOOVE 60 mixer - Diameter 12 mm and breaking load 15000 daN.